2005-08 Ford Mustang

2005,06,07,08 Ford Mustang stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Open center console, remove (2) phillips head screws from back of console cover.   Lift up and remove.  (console cover is held in place by two screws in back and press clips on each side and front)
2)Remove panel from along side of center dash by pulling from bottom to top.  Panels are held in place via press clips.
3)To remove radio trim bezel, extract (6) 9/32 screws (three on each side) from panel.  Unplug heat and AC control harnesses, remove panel.  Extract four 9/32 screws from radio mounting, unplug and remove.


Did these instructions help?



It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.