2003-06 Lincoln Navigator

2003,04,05,06 Lincoln Navigator stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Open the center console door and remove (1) push-pin type fastener from power window switch panel.  Unsnap, unplug and remove panel.
2)Extract (2) 7mm hex screws from back of gear shift / cup holder panel, unsnap and lift panel out of the way.
3)Extract (2) 7mm hex screws from below ashtray.
4)Use a panel removal tool to carefully unsnap and remove the entire radio - A/C control center dash bezel, unplug and remove.
5)Extract (2) 7mm hex screws from below stereo, unplug and remove stereo.


The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.