1999-00 Honda Civic

1999,00 Honda Civic stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Extract (2) screws from center panel below radio
2)Extract (4) screws from driver's side underdash panel, and unsnap to remove.
3)Extract (2) screws from left side of center dash panel.
4)Open glove box, push stoppers inward to let glove box hang all the way open.
5)Extract (2) screws from right side of center dash panel.
6)Pull the center dash panel down, unplug lighter socket and remove panel.
7)Looking up into dash from underneath, extract (4) screws securing the radio / pocket assembly.
8)Carefully pull out complete center console / radio / climate control assembly.
9)Unplug all control, radio, antenna, and remove entire assembly.


Did these instructions help?



It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.