1998-00 Isuzu Hombre Pickup

1998,99,00 Isuzu Hombre Pickup stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Extract the (2) screws securing the top area of the driver's side underdash cover panel.
2)Pull the driver's side underdash down to access and extract (2) 7mm hex screws holding the bottom of the dash bezel.
3)Extract the screw located in the top edge of the dash panel at the instrument cluster.
4)Carefully pry out on the dash bezel to release the fastening clips securing the bezel to the dash and unplug headlight / misc. switches on the driver's (left) of the bezel.
CAUTION: At this point, take care around the hazard switch, by tilting the wheel down and / or depressing the switch so the panel will clear.  Also take care to snap the passenger air bag switch from the dash panel and push it back through its own hole rather than unplugging the switch.  it is a costly repair bill in excess of $400 to replace the hazard switch.
5)Remove the dash bezel from the vehicle.

3)Remove the radio.

Did these instructions help?

It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.