1998-00 Dodge Durango

1998,99,00 Dodge Durango stereo removal instructions to help you remove your radio fast!

Radio Removal:1)Extract (3) screws from the bottom edge of small center plastic panel below steering column, pry out on panel to remove.
2)Use a panel removal tool to carefully pry out on the radio / dash panel, unsnap, unplug the left side of the panel, and remove.
3)Extract (2) 10mm bolts holding radio in, unplug and remove radio.

Did these instructions help?

It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.