1997-99 Pontiac Grand Prix

1997,98,99 Pontiac Grand Prix stereo removal instructions to help you remove your radio fast!


Radio Removal:
1)Extract (2) panel fasteners from driver's (left) side underdash cover.
2)Extract (2) 7mm hex screws from bottom edge of driver's (left) side lower dash panel and carefully pull out on the upper panel to release (2) panel clips.  Unplug and remove the dash piece.
3)Carefully pull out on the complete dash / radio / instrument bezel, unsnap, and unplug before removing.
4)Extract (2) 7mm screws holding the factory radio, unplug connectors and antenna to remove radio.


The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.