1997-01 Infiniti Q45

1997,98,99,00,01 Infiniti Q45 stereo removal instructions to help you remove your radio fast!

Radio Removal:
NOTE: The factory BOSE amplifier is located in the trunk, under the rear deck
1)Carefully pop out the dash vent / trim assembly and extract (4) screws from behind
2)Lift console / armrest to access lowest storage compartment
3)Pop out trim / latch assembly to access (2) screws and remove them.
4)Remove console / gear shift trim.  Unplug lighter / ashtray and remove.
5)Extract (4) screws from lower radio / console trim.
6)Carefully lift away and unplug complete radio / console assembly to remove
7)Extract (4) screws from each side of the double DIN radio to remove the radio from console assembly.


Did these instructions help?



It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.