1996-99 Isuzu Oasis

1996,97,98,99 Isuzu Oasis stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Open glovebox and unsnap glove box's rubber stoppers at the sides and remove (1) screw at restraining arm at the right side to let glove box open all the way down.
2)Extract (2) screws from right side of center console assembly.
3)Extract (2) screws from bottom of center console near carpet.
4)Open console storage compartment and extract (2) screws from near top.
5)Extract (2) screws from driver's side underdash panel and pop out the right side of panel only to access (1) screw holding center console assembly.
6)Carefully pull back on the lower center console assembly to unsnap, unplug, and remove.
7)Extract (2) screws from each side of slide out cup holder and remove cup holder
8)From underneath, extract (2) 8mm screws holding back edge of radio / pocket to dash structure.
9)Slide radio out of dash, unplug connectors, antenna, and remove.

Did these instructions help?

It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.