1995-99 Pontiac Sunfire / Convertible

1995,96,97,98,99 Pontiac Sunfire Convertible stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Open glovebox then remove (2) screws along the right side of the radio / heater trim bezel.
2)Carefully pull out on the right side of the radio / heater trim bezel and (2) alignment pins will release on the driver's steering column panel.
3)Remove radio / heater trim bezel.
4)Extract (2) screws holding radio, unplug and remove.



Did these instructions help?



It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.