1995-98 Nissan 240SX

1995,96,97,98 Nissan 240SX stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Carefully pop out ashtray and remove (1) screw from ashtray cavity.
2)Unsnap shifter trim bezel.
3)Remove (2) screws at bottom of radio trim bezel.
4)Carefully pry out upper vent hazard / defroster switch assembly.
5)Extract (2) screws holding top of radio assembly.
6)Lift radio assembly up from dash.  Unplug all connectors, antenna, and remove radio.
7)Extract (2) screws from each side of radio to remove it from steel bracket assembly.
8)Repeat step "8" to remove pocket if needed.


The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.