1994-98 Toyota Supra

1994,95,96,97,98 Toyota Supra stereo removal instructions to help you remove your radio fast!

Radio Removal:NOTE: the factory radio is code protected.  Be sure to have the reset code if it is going to be reinstalled.
NOTE 2: the factory sound system amplifier is located under the passenger seat.
1)Extract (5) screws from the panel above the instrument trim panel.  Unplug and remove.
2)Remove trim around shifter by prying up with a panel removal tool and remove.
3)Extract (1) screw on the top right corner of the instrument / radio trim bezel securing it to the dash.
4)Using a panel removal tool, carefully release the panel fasteners around the perimeter of the dash bezel and remove.
5)Pry out on top corner of speedometer trim to release radio trim.  Unplug connectors and remove.
6)Extract (4) screws securing the radio to the dash.  Unplug connectors and remove.


The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.