1994-97 Honda Accord

1994,95,96,97 Honda Accord stereo removal instructions to help you remove your radio fast!

Stereo Removal:
1) Remove the ashtray and extract the screw located in the ashtray cavity security the radio dash bezel to the dash
2)Remove the cup holder located in front of the console storage compartment and extract the screw from inside the cavity securing the console
3)Carefully pry up on the cover panel located in the console storage pocket with a small screwdriver and extract the (2) screws securing the console
4)Carefully slide the console back far enough to access and remove the (2) screws behind the shifter securing the radio dash bezel.
5)Using a panel removal tool carefully pry up on the perimeter of the radio trim bezel starting around the shifter to release the fastening clips securing it to the dash, unplug all connectors and remove the bezel.
6)Extract the (2) bolts securing the rear support of the radio to the dash below the radio / pocket assembly, pull the radio out of the dash cavity, unplug all connectors and remove the radio.

Did these instructions help?

It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.