1994-01 Honda Passport

1994,95,96,97,98,99,00,01 Honda Passport stereo removal instructions to help you remove your radio fast!

Radio Removal:
1) Remove the ashtray from the console, then extract (2) screws securing the radio / console trim along bottom.
2)Locate and remove (2) screws from along the console sides - (1) from each side of the console.
3)Remove the trim knobs from the climate controls.
4)Pull the panel off of the console and extract (2) screws from each side of the radio (screws secure the radio / bracket assembly)
5)Pull the radio assembly out of the cavity - disconnect the connectors and remove the radio

Did these instructions help?

It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.