1992-95 Buick Skylark

1992,93,94,95 Buick Skylark stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Pull out on the ashtray and extract the (2) screws securing the rear of the ashtray assembly.
2)Extract the (2)  screws securing  the front of the ashtray and the lower section of the radio trim bezel in the ashtray cavity.
3)Carefully pry outward on the radio trim bezel with a panel removal tool / screwdriver to release the fastening clips securing it to the dash and remove.
4)Remove the (2) nuts from the bottom of the radio chassis securing the radio to the dash.  Pull the radio from the cavity, unplug all the connectors and remove the radio.

Did these instructions help?

It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.