1992-93 Pontiac Grand Prix

1992,93 Pontiac Grand Prix stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Extract the (2) screws securing the glove box door hinges and remove the door.
2)Extract the (2) screws securing the radio trim bezel on the passenger side.
3)Extract the (3) screws from the underside of the dash securing the under dash panel below the steering column.  Disconnect all the connectors and remove the panel.
4)Extract the (2) screws securing the radio trim bezel on the driver's side and remove the bezel.
5)Remove the (2) nuts from the bottom of the radio cavity securing the radio to the dash.  Pull the radio from the cavity, unplug the connectors and remove the radio.

The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.