1991-95 Toyota MR2 (Sport Coupe)

1991,92,93,94,95 Toyota MR2 stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Pull out the ashtray and remove 2 screws from the location.
2)Remove the shifter console trim plate, it is secured by four plastic pop tabs.
3)Remove (1) screw located below the ignition switch.  Then release the panel clips from this location, enough to free the radio trim bezel.  Release the plastic pop fasteners from around the edge of the trim bezel, pull back the bezel, disconnect the connectors and remove the trim.
4)Remove the (4) screws securing the radio, pull the radio out, disconnect the connectors and remove the radio.

The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.