1991-94 Buick Park Avenue

1991,92,93,94 Buick Park Avenue stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Extract the (2) screws from the top underside of the instrument trim bezel
2)Remove the trim below the dash bezel on the left and ride sides of the steering wheel by carefully prying outward with a panel removal tool / screwdriver to release the fastening clips.
3)Remove the (8) screws located behind the trim securing the dash trim bezel and the lower section of the glove box.
4)Remove all (4) dash vents by pulling them outward and removing the single screw in each.
5)Open the glove box and extract the screws from each top corner and remove the glove box.
6)Remove the dash trim bezel
7)Extract the (5) screws securing the radio, pull the unit out of the dash cavity, unplug all the connectors and remove the radio.

Did these instructions help?

It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.