1991-93 Nissan NX

1991,92,93 Nissan NX stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Remove (2) screws above the radio in the trim bezel.
2)Remove (2) screws below the ashtray securing the bezel.
3)Unsnap the shifter trim and remove.
4)Starting from the top, release the bezel from the dash by pulling outward.  Unplug the connectors.  Tilt the bezel upward and remove the cable from the air vent at the top of the bezel.
5)Extract the (4) screws securing the radio to the dash.  Pull the radio out of the cavity.  Unplug all connectors and remove.


The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.