1990-96 Nissan 300ZX

1990,91,92,93,94,95,96 Nissan 300ZX stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Snap off the trim piece from along the top edge of the radio and remove (2) screws from this location
2)Remove (1) trim cap from each top corner of the dash / radio trim piece and extract (2) screws from this location
3)Carefully snap off the trim panel.  Spring clips secure the trim in the two lower corners.
4)Extract the (4) screws securing the radio / bracket assembly to the dash.  Pull the assembly out of the cavity.  Disconnect the wire harnesses and remove the radio.

The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.