1990-94 Chevrolet Lumina

1990,91,92,93,94 Chevrolet Lumina stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Remove the (2) screws from the lower steering column trim piece (below the column).  Pull the panel down to access the bottom.
2)Pull outward along the top and bottom portion of the trim panel.  Release each vent's individual spring clip.
3)Extract the (4) screws from the radio bracket.
4)Pull the unit out of the cavity. Disconnect the connectors and remove the unit.

NOTE: 1)due to it's rear support, you may need to use slight force to pull the radio free.  2)The factory antenna uses a micro-size jack.  We recommend Radio Shack's GM antenna adapter.
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.