1990-93 Dodge Daytona

1990,91,92,93 Dodge Daytona stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Pull firmly outward on the console / radio trim panel - secured by (5) metal spring clips, (2) at the top, (2) on the right side and (1) on the left side.
2)Extract the top (2) screws from each side of the lower console - this allows you to slightly spread the console, providing clearance to remove the radio.
3)Remove the remaining (2) screws securing the radio, disconnect the connectors and remove the radio.


Did these instructions help?



It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.