1990-93 Chrysler Fifth Avenue

1990,91,92,93 Chrysler Fifth Avenue stereo removal instructions to help you remove your radio fast!

Radio Removal:1)Remove (9) securing screws from the top and bottom of the radio trim panel.   Remove the panel by pulling it down and out.
2)Unhook the wiring harness.
3)Remove the (2) Chrysler anti-theft bolts retaining the radio (use Snap-On bit TTW 12 for 1/4" driver) and remove the radio.  Disconnect power, ground cable, antenna and speaker wires.


Did these instructions help?



It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.