1990-92 Nissan Stanza (Sedan)

1990,91,92 Nissan Stanza stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Extract (2) screws from above the radio location - screws secure the trim panel.
2)Pull the ashtray out and remove two screws securing the lower edge of the trim piece.
3)Remove (3) screws from the bottom edge of the dash trim piece - one below the hazard light and defroster switch and two located to the left of the steering column.
4)Release spring clips that secure the entire top edge of the dash trim - clips may require firm prying at each location.
5)Disconnect the harnesses from the various switches and remove the trim.
6)Four screws secure the radio assembly to the dash.

The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.