1989-95 Dodge Spirit

1989,90,91,92,93,94,95 Dodge Spirit stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Carefully release the spring type fasteners from the radio / console trim panel - (3) from along the top and (2) from the bottom of the panel.
2)Remove (2) screws from along the top of the side console trim pieces, and spread the side piece out slightly for access to the radio bolt.
3)After spreading the side piece, extract the top right radio mounting bolt, then remove the bottom left bolt.
4)Spread the side piece once again to provide clearance for pulling the radio out of the cavity;  pull the radio out, disconnect the connectors, and remove the radio.

Did these instructions help?

It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.