1989-94 Oldsmobile Cutlass Supreme

1)Remove the 5 screws from the top underside of the radio / instrument trim panel. Carefully release the clips from along the bottom edge of the panel to remove it.

2)Remove the 2 screws securing the radio to the dash, and pull the radio out of the cavity. Disconnect the wire harnesses and the antenna lead then remove the radio.


The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.