1989-94 Chrysler Le Baron Landau

1989,90,91,92,93,94 Chrysler Le Baron Landau stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Starting from the bottom, gently pry outward on the radio trim bezel to release the two spring clips on the bottom and three across the top.
2)Unplug the lamp harness from the back of the trim bezel and remove.
3)Extract (2) screws above radio, one at the lower right corner behind glove box door, and one screw at the lower right hand corner below steering column.
4)Remove the trim panel around the radio itself.
5)Extract (2) hex head screws holding radio in place, unplug all connectors and unbolt ground strap.
6)Remove radio.


Did these instructions help?



It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.