1989-93 Oldsmobile Touring Sedan

1988,89,90,91,92,93 Oldsmobile Touring Sedan stereo removal instructions to help you remove your radio fast!

Radio Removal:
 1)Open the center console storage compartment, then remove the (2) screws securing the storage sleeve / pocket.  Remove the sleeve / pocket insert.
2)Remove the (2) screws from the front edge of the console pocket (at the wood trim), then remove the trim section.
3)Pop out and remove the electrical seat control panel (located in the center console).
4)Carefully snap off the trim piece from around the gear selector, then remove the (4) screws securing the wood trim to the console substructure.
5)Remove the wood trim piece from the top of the console, pull the trim piece back and up to remove.  Disconnect the wire harnesses and remove the trim piece.
6)Extract the (4) screws which secure the radio, pull the radio out of the cavity, disconnect the wire harnesses and the antenna, then remove the radio.


The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.