1988-92 Toyota Corolla (Sedan Console Location)

1988,89,90,91,92 Toyota Corolla stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Remove (2) phillips head screws from the underside of the dash console trim, one at underside on the right side of the ignition switch and one at underside, just above left dash speaker location.
2)Gently release panel fasteners and remove dash / console trim.


The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.