1986-91 Cadillac Seville

1986,87,88,89,90,91 Cadillac Seville stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Gently pry on the edges of the vent trim piece located above the radio.  Release the snaps and remove the trim piece.
2)Remove the (3) screws from above the radio.
3)Extract the (3) screws from the dash panel trim piece above the instrument cluster.
4)Gently pry out the driver's side air vent in the dash trim to access the single screw which secures the left side of the trim panel.  Remove the screw and the trim panel.
5)Loosen the (2) bolts which secure the radio to the dash.  Slide the radio out of the cavity.  Disconnect the antenna, speakers, all the electrical connections and remove the radio.



Did these instructions help?



It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.