1986-91 Buick Le Sabre

1986,87,88,89,90,91 Buick Le Sabre stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Carefully snap off the trim from around the air-conditioning controls.
2)Remove the (4) screws from behind the trim piece.
3)Slide the radio trim panel to the left (driver's side) of the car and remove it.
4)Remove the (4) screws which secure the radio to the dashboard, slide the radio out of the cavity and disconnect the antenna, speaker leads and all the electrical supply harnesses.  Remove the radio

Did these instructions help?

It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.