1985-89 Dodge Lancer

1985,86,87,88,89 Dodge Lancer stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Remove (11) screws from the perimeter of the dash trim panel and remove the trim panel.
2)Remove (2) anti-theft bolts (use Snap-on bit TTW12 for 1/4" drive) which secure the radio to the dash substructure;  pull the radio out of the cavity, disconnect all wiring, and remove the radio.


Did these instructions help?



It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.