1984-91 Jeep Grand Wagoneer

1984,85,86,87,88,89,90,91 Jeep Grand Wagoneer stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Remove (2) screws from the instrument panel, one from above the cigarette lighter, and one from above the headlight switch.  Unsnap and remove the lower steering column trim piece and remove the trim panel.
2)If equipped with a factory radio, remove the (2) screws securing the radio brackets to the dashboard.
3)Pull the radio out of the cavity, disconnect all electrical connections, then remove the radio.


The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.