1984-88 Toyota Pickup

1984,85,86,87,88 Toyota Pickup stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Remove ashtray and (3) phillips head sheet metal screws from ashtray cavity.
2)Remove (1) phillips head sheet metal screw from each lower front side of radio trimpanel.
3)Using a panel removal tool, carefully pry on edges of trimpanel and remove.
4)Remove (4) phillips head sheet metal screws which secure radio / equalizer / pocket to dashboard.
5)Slide radio out of cavity, disconnect power, antenna, speaker and all other electrical connections and remove radio.


The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.