1983-84 Oldsmobile Omega

1983,84 Oldsmobile Omega stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Remove the (4) screws retaining the panel below the steering column and remove the panel.
2)Extract the (4) screws from inside the top edge of the instrument cluster trim.
3)Remove the (2) screws from the lower instrument cluster trim, one on each side of the steering column.
4)Remove the dash trim panel.
5)Remove the (4) 7mm hex screws from the radio brackets / dummy panel.  Pull the radio out of the cavity, disconnect the antenna, speaker leads and all the electrical connections, then remove the radio.


The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.