1981-84 Dodge Aries

1981,82,83,84 Dodge Aries stereo removal instructions to help you remove your radio fast!

1)Remove 4 screws from the top of the radio panel trim and 4 from the bottom of the panel trim. Remove the panel.

2)Remove 2 bolts retaining the radio, and remove the radio. Disconnect the power, ground cable, antenna and speaker wires.


Did these instructions help?



It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.