1980-86 Ford Bronco-Pickup

1980,81,82,83,84,85,86 Ford Bronco Pickup stereo removal instructions to help you remove your radio fast!

Radio Removal:1)Remove knobs from radio when vehicle is equipped with a radio.
2)Remove (2) screws from top of the radio panel.  Pull the top out and up to release the tabs on the bottom of the panel.
3)Remove (4) screws from the radio mounting bracket.  Remove the assembly.
4)Disconnect the power, antenna, and all speaker and electrical connections.


Did these instructions help?



It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter



The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter


Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.