1975-79 Plymouth Fury

1975,76,77,78,79 Plymouth Fury stereo removal instructions to help you remove your radio fast!

Radio Removal:1)Remove (4) securing screws from the bottom edge of the radio dash panel.
2)Remove (2) securing screws from the top edge of the panel above the radio.
3)Unscrew the retainer ring securing the remote mirror control and remove the panel.
4)Remove (2) screws securing radio to the dash.  Pull the radio out.
5)Disconnect power, antenna and all speaker and electrical connections

The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.