1975-78 Chrysler New Yorker

1975,76,77,78 Chrysler New Yorker stereo removal instructions to help you remove your radio fast!

Radio Removal:
1)Remove (3) screws from the bottom edge of the dash panel.
2)Remove the ashtray and remove (1) screw retaining the dash panel.
3)Disconnect the cigarette lighter and wiper wires.
4)Pull the dash panel out from the top.  Place the gear selector in low gear and remove the dash panel.
5)Release the radio rear support.  Remove (2) screws securing the radio to the dash.  Pull the radio out.
6)Disconnect the power, antenna, and all speaker and electrical connections.

Did these instructions help?

It got the job done.$1.00

It really helped me out!$3.00
The 2 main things you will need when installing your new stereo is a wiring adapter and a dash kit.

Wiring Adapter

The wiring adapter is a piece which has a plug on one end and wiring sticking out of the other end. The plug connects to the factory wiring, and the wires are connected to the matching color wiring on the new stereo. This allows for connecting a new stereo without having to cut the factory wires.

Dash Kit

car stereo wiring adapter

Stock stereos have varying sizes, and if you just place an aftermarket stereo in the hole left by a stock stereo then there will be gaps around the stereo. The dash kit is a plastic piece which fits into the hole left by the stock stereo and fills in the gaps between the aftermarket stereo and the dash.